62 Series RV Carbon Monoxide – White – Flush Mount – 12V with Trim Ring
Features:
- This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts.
- NMMA Listed Component.
- Space Saving design works in harsh marine environments.
- Works in extreme temperatures. Only CO alarm listed to operational temperatures of -40°F to 158°F. The alarm has consistently held up in the excessive cold and heat due to the high-quality sensor.
- No False Alarms due to new boat smell, outgassing, or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut-off alarms are available.
- Low Current Draw(37 mA). An innovative micro-current circuit saves battery power for the boater.
- Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. The alarm will reactivate if it still senses dangerous levels of CO.
- End of Life Signal alerts boater to replace the alarm after 5 years of service.
- Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory.
- The rapid recovery sensor resets when silenced or reactivates the alarm if dangerous levels of CO remain.
Specifications:
- Conforms To ANSI / UL STD 2034*
- * Testing Laboratory: ETL/Intertek
- Alarm Point: 400 PPM 4-15 Minutes
- Low voltage power warning at 7 Volts
- Power Supply and Current Draw: 37 mA @ 13.8 VDC
- Operational Range: 13.8 Volts +/-15%
- Low voltage power warning at 7 Volts
- Operating Temperature: -40°F to +158°F
- Case Size: 4.5″W x 3.25″H x 1.25″D
There are no reviews yet.